1. Adapting industrial cabinet, suitable for production line and other harsh environments.
2. Frequency range: 100Hz-2MHz set as need, suitable for any metallic material.
3. Magnification: 0-70db, step for 0.1db.
4. Phase: 0°- 360°, step for 1°
5. Two independent optional frequency.
6. Automatic phase, amplitude analysis.
7. Automatic zero system: Zero intervals can be set.
8. Three different style of alarm area, and can be applied to any modes.
9. Cut start and end signal function.
10. Auto-screen/tracking impedance showed, and can be set interval or cancel.
11. Automatic delay alarm system, and delay time can be set.
12. Automatic delay marking system, and delay time can be set.
13. Replay testing signal and two-way access, can automatic save this in hard disk, and you can burn a disc for permanent preservation.
14. Perfect documents process function, and customized production of standard parameters.
15. Automatic high-speed analog/digital electronic equilibrium.
16. Allocate every probe: Out-through probe, rotational-scan probe, etc.
17. Suitable for online quality testing of metal pipe and bar manufacturers.

System applicable standards:

• China: GB/T 14480–93, GB/T 7735—98

GB/T 5248–98, GB/T 5126—2001

GB/T 12969.2, GB/T 11260–96

• Japan: JISH 0502
• S.A: ASTM-E 243–97
• Germany: DIN 54141

Applications

• Online nondestructive testing on copper tube, steel pipe, stainless steel pipe, welded pipe, aluminum-plastic pipe, steel wire, bimetallic tube, optical cable, alclad steel wire, aluminum wire and metal bar production-line
• Nondestructive testing on oil casing, sucker rod, hollow shaft, etc.
• Nondestructive testing on condenser tube, air conditioner pipe, automobile oil pipe, etc.
• Nondestructive testing on various kinds of metal pipe, bar, wire, etc.

WT-182 Eddy Current Flaw Detector最先出現在Ningbo Detection Equipment LTD.。

1. Two separate channels, be able to control two production lines.
2. Adapting industrial cabinet, suitable for production line and other harsh environments.
3. Frequency range: 100Hz-2MHz set as need, suitable for any metallic material.
4. Magnification: 0-70db
5. Phase: 0°- 360°
6. Automatic phase, amplitude analysis.
7. Automatic zero system: Zero intervals can be set.
8. Three different style of alarm area, and can be applied to any modes.
9. Cut start and end signal function.
10. Auto-screen/tracking impedance showed, and can be set interval or cancel.
11. Automatic delay alarm system, and delay time can be set.
12. Automatic delay marking system, and delay time can be set.
13. Replay testing signal and two-way access, can automatic save this in hard disk, and you can burn a disc for permanent preservation.
14. Perfect documents process function, and customized production of standard parameters.
15. Automatic high-speed analog/digital electronic equilibrium.
16. Allocate every probe: Out-through probe, rotational-scan probe, etc.
17. Suitable for online quality testing of metal pipe and bar manufacturers.

System applicable standards:

• China: GB/T 14480–93, GB/T 7735—98

GB/T 5248–98, GB/T 5126—2001

GB/T 12969.2, GB/T 11260–96

• Japan: JISH 0502
• S.A: ASTM-E 243–97
• Germany: DIN 54141

Applications

• Online nondestructive testing on copper tube, steel pipe, stainless steel pipe, welded pipe, aluminum-plastic pipe, steel wire, bimetallic tube, optical cable, alclad steel wire, aluminum wire and metal bar production-line
• Nondestructive testing on oil casing, sucker rod, hollow shaft, etc.
• Nondestructive testing on condenser tube, air conditioner pipe, automobile oil pipe, etc.
• Nondestructive testing on various kinds of metal pipe, bar, wire, etc.

WT-198 Eddy Current Flaw Detector最先出現在Ningbo Detection Equipment LTD.。

1. Portable all-in-one machine, with a touch screen. Very convenient to install to anywhere in the production lines.
2. Frequency range: 100Hz-2MHz set as need, suitable for any metallic material.
3. Magnification: 0-70db, step for 0.1db.
4. Phase: 0°- 360°, step for 1°
5. Automatic phase, amplitude analysis.
6. Automatic zero system: Zero intervals can be set.
7. Three different style of alarm area, and can be applied to any modes.
8. Cut start and end signal function.
9. Auto-screen/tracking impedance showed, and can be set interval or cancel.
10. Automatic delay alarm system, and delay time can be set.
11. Automatic delay marking system, and delay time can be set.
12. Replay testing signal and two-way access, can automatic save this in hard disk, and you can burn a disc for permanent preservation.
13. Perfect documents process function, and customized production of standard parameters.
14. Automatic high-speed analog/digital electronic equilibrium.
15. Allocate every probe: Out-through probe, rotational-scan probe, etc.
16. Suitable for online quality testing of metal pipe and bar manufacturers.

System applicable standards:

• China: GB/T 14480–93, GB/T 7735—98

GB/T 5248–98, GB/T 5126—2001

GB/T 12969.2, GB/T 11260–96

• Japan: JISH 0502
• S.A: ASTM-E 243–97
• Germany: DIN 54141

Applications

• Online nondestructive testing on copper tube, steel pipe, stainless steel pipe, welded pipe, aluminum-plastic pipe, steel wire, bimetallic tube, optical cable, alclad steel wire, aluminum wire and metal bar production-line
• Nondestructive testing on oil casing, sucker rod, hollow shaft, etc.
• Nondestructive testing on condenser tube, air conditioner pipe, automobile oil pipe, etc.
• Nondestructive testing on various kinds of metal pipe, bar, wire, etc.

WT-581 Eddy Current Flaw Detector最先出現在Ningbo Detection Equipment LTD.。

1. Portable all-in-one machine, with a touch screen. Very convenient to install to anywhere in the production lines.
2. Frequency range: 100Hz-2MHz set as need, suitable for any metallic material.
3. Magnification: 0-70db, step for 0.1db.
4. Phase: 0°- 360°, step for 1°
5. Two independent frequency.
6. Automatic phase, amplitude analysis.
7. Automatic zero system: Zero intervals can be set.
8. Three different style of alarm area, and can be applied to any modes.
9. Cut start and end signal function.
10. Auto-screen/tracking impedance showed, and can be set interval or cancel.
11. Automatic delay alarm system, and delay time can be set.
12. Automatic delay marking system, and delay time can be set.
13. Replay testing signal and two-way access, can automatic save this in hard disk, and you can burn a disc for permanent preservation.
14. Perfect documents process function, and customized production of standard parameters.
15. Automatic high-speed analog/digital electronic equilibrium.
16. Allocate every probe: Out-through probe, rotational-scan probe, etc.
17. Suitable for online quality testing of metal pipe and bar manufacturers.

System applicable standards:

• China: GB/T 14480–93, GB/T 7735—98

GB/T 5248–98, GB/T 5126—2001

GB/T 12969.2, GB/T 11260–96

• Japan: JISH 0502
• S.A: ASTM-E 243–97
• Germany: DIN 54141

Applications

• Online nondestructive testing on copper tube, steel pipe, stainless steel pipe, welded pipe, aluminum-plastic pipe, steel wire, bimetallic tube, optical cable, alclad steel wire, aluminum wire and metal bar production-line
• Nondestructive testing on oil casing, sucker rod, hollow shaft, etc.
• Nondestructive testing on condenser tube, air conditioner pipe, automobile oil pipe, etc.
• Nondestructive testing on various kinds of metal pipe, bar, wire, etc.

WT-582 Eddy Current Flaw Detector最先出現在Ningbo Detection Equipment LTD.。

Main features:

1. 15-inch LCD touch screen.
2. Two separated channels.
3. Sensitivity: ≥05mm crack.
4. Speed: ≈5 sec/piece (based on length of parts).
5. Automatic loading, selecting, counting and unloading.
6. No damage after detection.
7. Statistics total number, qualified number, qualified rate, etc.

WT-602 Roller Eddy Current Flaw Detector最先出現在Ningbo Detection Equipment LTD.。

Main features:

1. Detecting area: OD.
2. 15-inch LCD touch screen.
3. Two separated channels.
4. Sensitivity: ≥05mm crack.
5. Speed: ≈5 sec/piece (based on width of parts).
6. Automatic loading, selecting, counting and unloading.
7. No damage after detection.
8. Statistics total number, qualified number, qualified rate, etc.

WT-602R Bearing Ring Eddy Current Flaw Detector最先出現在Ningbo Detection Equipment LTD.。

Main features:

1. Work with eight-channel.
2. Detecting area: ID, OD, both ends and groove.
3. Speed: 2s/piece.
4. Automatic loading, selecting and counting.
5. No damages after detection.
6. Detect without demagnetization.
7. Statistics total number, qualified number, qualified rate, etc.

Main Technical Parameters:

1. Detection sensitivity: ≥0.05mm depth cracks.
2. Equipment noise: ≤60 db. Power: ≤500 W (220V).
3. Frequency range: 100Hz-1MHz.
4. Magnification: 0-70db.
5. Phase: 0°- 360°.

WT-608 Bearing Ring Eddy Current Flaw Detector最先出現在Ningbo Detection Equipment LTD.。

Main features:

1. Using eight point-differential probes.
2. Detection sensitivity: ≥0.05mm length, ≥2mm depth cracks.
3. Detection area: ID and end face.
4. Detection range：(Ф12mm～Ф50mm) axisymmetric parts.
5. Speed: 2 secs/piece.
6. Detection speed 6. Frequency range: 100Hz-1MHz set as need.
7. Sampling speed: 16×2500/s
8. Gain: 12-70db.
9. Phase: 0°- 360°.
10. Using industrial computer
11. Automatic loading, selecting, counting and unloading.
12. No damage after detection.
13. Power: ≤400W(220V).

WT-618 Eddy Current Flaw Detector最先出現在Ningbo Detection Equipment LTD.。

Main features:

1. Two separate channels. One for flaw detection, one for hardness sorting.
2. Detection sensitivity: ≥0.05mm length, ≥2mm depth cracks. ≥
3. Speed: 2 secs/piece.
4. Automatic loading, selecting, counting and unloading.
5. No damage after detection.
6. Detect without demagnetization.
7. Statistics total number, qualified number, qualified rate, etc.

WT-632 Integrated Eddy Current Testing Machine最先出現在Ningbo Detection Equipment LTD.。

1. Crack detection of short metal bars
2. Two separate channels.
3. Frequency range: 100Hz-2MHz.
4. Sensitivity: ≥05mm depth crack.
5. Automatic loading, selecting, counting and unloading.
6. Speed: 1 sec/piece (two channels).
7. Sampling speed: 4×25000/s.
8. Gain: 12-70db.
9. Phase: 0°- 360°.
10. Using industrial computer
11. No damage after detection.
12. Power: ≤400W(220V).
13. Size: 1000mm×650mm×1600mm.

WT-662 Eddy Current Flaw Detector最先出現在Ningbo Detection Equipment LTD.。